ActiLume 1-10V

  • 產品說明

    • A daylight-regulation/presence-detection device which can easily be fitted in a 1-10 V luminaire
    • The sensor can be connected to the ballast directly (only dimming) or in combination with the SwitchBox (dimming and switching)
    • Offers easy-to-install energy-saving solutions
    • Has the same form fit as the ActiLume DALI & ActiLume MicroLuxSense sensor with cover

Videos

[trigger to render Video Gallery]

Images

產品系列資訊

ActiLume 1-10 V 可連接至 HF-R 安定器的 1-10 V DC 控制輸入,ActiLume 1-10 V 經過校準,可應用於安裝了 600 勒克斯與 500 勒克斯的標準情境

功能

If needed, ActiLume 1-10 V can be adjusted manually, using a rotating diaphragm to adjust the set point
The sensitivity of the sensor can be changed within a range from 1/3 to 3
With the rotary control it is possible to select a delay time between 1 and 30 minutes
In combination with the SwitchBox, up to 3 HFR 254 T5 ballasts can be switched, resulting in extremely low stand-by losses (< 350 mW)
Personal control via the Touch and Dim functionality on the SwitchBox
Push-button to activate 100 hours burn-in mode for the lamps

應用

ActiLume 1-10 V 專為各種室內應用設計
ActiLume 1-10 V 專為最高 3.5 公尺的天花板高度設計
    • 利用 MyProjects 管理專案
      使用 MyProjects 來建立、儲存、管理項目及專案,並與同事和團隊成員分享。

攜手創造  新價值


尋找鄰近的經銷商或合作夥伴
 

請由下表選擇您所在的國家或地區,
尋找鄰近的經銷商或合作夥伴。

 

經銷商或合作夥伴搜尋

You are now visiting our Global professional lighting website, visit your local website by going to the USA website